DPS 15HP MY-PS-15 Used for 10HP(7.5kW) 30A Motor, Single to 3 Phase Converter…
$582.33 Buy It Now or Best Offer free,30-Day Returns
Seller Store dantsei0 (83)100.0%,
Location:Brentwood, New York Ships to: US, Item:335653001486
Restocking Fee:No Return shipping will be paid by:Seller All returns accepted:Returns Accepted Item must be returned within:30 Days Refund will be given as:Money Back EAN:0792816634714 ISBN:0792816634714 Package Dimensions LxWxH:9.69×6.38×5.71 Inches Weight:5.8 Pounds Type:Does not apply DPS:DPS
▷ Before ordering our DPS, you should check the ampere of your motor and purchase the suitable our DPS. And please give us the information about your motor purpose to recommend suitable DPS to you. Also, please note the below points carefully. 1. MY-PS-15 model is best for 10HP motor.(7.5KW, 30 amps) 2. It should only be used for one motor per one DPS. The use of multiple motors is not allowed in our DPS. 3. The input/output voltage of our DPS is 200v~240v. 4. Our DPS is designed to be suitable for use in motor. 5. The efficiency is around 90~95%. 6. The voltage of motor should be 200v~240v. If the voltage of your motor is 380v or 440v, you should change the wire of motor to 200v~240v purpose to connect with output of our DPS. 7. The thickness of wires should be suitable for amperes. 8. Only single phase motor brake is allowed.(Three phase motor brake is not working at our DPS) 9. You could check three phase on the output of DPS when your motor is running. If your motor is not running, you could not check three phase from output of DPS. 10. If your motor has magnetic starter, or electronic switch, or brake, the operating wires of this device should be connected on “U” and “W” of output of our phase converter. Thus, if your motor is not running well or the motor is reversing, you should turn off the power immediately and you have to switch the wires on output(U, V, W) of our phase converter. Actually, when you connect the wires from output of phase converter to your motor, you could succeed in first time, or second time, or third time. A. Detail information 1. Capacity : Suitable for 10HP motor(7.5KW, 30 amps) 2. Frequency : 50/60 Hz 3. Dimension(inch) : 5.7x5x9(WxLxH) 4. Mounting holes : 5Ø 5. Net Weight : 5.2LB 6. Voltage of input and output : 200V — 240V DPS can run 3-phase motor with single-phase Very easy to connect DPS and motor/Very easy to use Small size & light weight Even after the motor starts, 3-phase power continues to be supplied Achieved UL listed(UL-US-2328605-1, UL-CA-2324527-1) Digital Type Phase Converter/ Excellent start-up torque Low failure rate/Designed to be non-flammable Keeps out dust, moisture, and heat due to the sealed type Doesn’t make any high frequency/Lower power consumption Efficiency is excellent versus others phase converters
Frequently Asked Questions About DPS 15HP MY-PS-15 Used for 10HP(7.5kW) 30A Motor, Single to 3 Phase Converter… in My Website
biexcorpsa.com is the best online shopping platform where you can buy DPS 15HP MY-PS-15 Used for 10HP(7.5kW) 30A Motor, Single to 3 Phase Converter… from renowned brand(s). biexcorpsa.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling DPS 15HP MY-PS-15 Used for 10HP(7.5kW) 30A Motor, Single to 3 Phase Converter… on biexcorpsa.com?